Recording Via The Aquos Recorder Epg (Only For Recorder); Using Av Link Function; Speaker/Amplifier Connection - Sharp LC-46HD1E Operation Manual

Connecting external devices
Recording via the AQUOS Recorder EPG
(only for recorder)
You can call up the CEC-compatible recorder's EPG
and preset timer recordings using the TV's remote
control.
1
Open the remote control's flip cover.
2
Press OPTION.
• The AQUOS LINK menu displays.
3
Press a/b to select "AQUOS Recorder EPG",
and then press OK.
• The external input source switches and the recorder's
EPG is displayed.
4
Select the programme to record.
• Refer to the operation manual of the recorder for
details.

Using AV Link function

This TV incorporates four typical AV Link functions
for smooth connections between the TV and other
audiovisual equipment.
One Touch Play
While the TV is in standby mode, it automatically turns
on and plays back the image from the audiovisual
source (e.g. VCR, DVD).
TV Standby
When the TV enters standby mode, the connected
audiovisual equipment (e.g. VCR, DVD) enters standby
mode as well.
WYSIWYR (What You See Is What You Record)
When the remote control unit of the connected VCR
has the WYSIWYR button, you can automatically start
recording by pressing the WYSIWYR button.
Preset Download
Automatically transfers the channel preset information
from the tuner on the TV to the one on the connected
audiovisual equipment (e.g. VCR) via the EXT 2
terminal.
NOTE
• Refer to operation manuals of each external equipment for
the details.
• The use of the AV Link function is only possible if the
TV-set has enforced a complete auto installation with
the connected audiovisual equipment (Page 10, initial
installation wizard).
The availability of the AV Link function depends on
the audiovisual equipment used. Depending on the
manufacturer and type of equipment used, it is possible
that the described functions may be completely or partially
unusable.
22
Downloaded From TV-Manual.com Manuals

Speaker/amplifier connection

Connect an amplifier with external speakers as shown
below.
E
Connecting a digital amplifier
DIGITAL AUDIO (OUT)
NOTE
• HDMI audio signals are not output from DIGITAL AUDIO
(OUT).
E
Connecting an analogue amplifier
AUDIO OUT L-R
NOTE
• HDMI audio signals may not be output from the AUDIO
OUT L-R.
E
Using TV speakers as centre speakers
Connect as shown if using the TV speakers as a centre
speaker. In this case, make a connection between the
centre output of the amplifier and the centre input of
the TV (AUDIO IN CENTRE) with a cinch cable.
AUDIO IN
(CENTRE)
PREOUT
(C)
1
After connecting, go to "TV menu >
Connections > Sound components > HiFi/AV
amplifier."
2
When you select "Surround amplifier" for "Type
of amplifier", make sure to select "yes" for the
item "TV loudsp. as centre speaker".
ATTENTION
Do not use the centre speaker connection of the
amplifier, use the centre pre-amp output instead!
TV
Digital amplifier
TV
Analogue amplifier
TV
DIGITAL AUDIO (OUT)
Digital amplifier