Power Management; Change The Time Zone; Set The Clock; Automatically Switch The Tv On Or Off (On /Off Time) - Sharp LC-19DV200E Operation Manual

TV menu

Power Management

1.
Press TV MENU on the remote control and
≥ Power Management.
Select
2.
Press to select:
/
On: If a period of time is elapsed with no video
signal in PC mode, the power status is changed
to stand by mode automatically. When there is
available video signal again, the power status is
returned to power on mode automatically.
Off: Disable Power Management.

Change the time zone

1.
Press TV MENU on your remote control and
≥ Time Setup.
select
2.
Press OK or to enter Time Setup.
3.
Select Time Zone and press
your time zone.
4.
Follow the on-screen instructions to exit.

Set the clock

1.
Press TV MENU on your remote control and
≥ Time Setup.
select
2.
Press OK or to enter Time Setup.
/
3.
Press to select Time and press OK or
to enter.
4.
Select Auto Synchronization
to select:
• On: Sets the clock automatically the same with
the digital signal time. (Only if digital signal is
available).
• Off: Press /
or system Time manually by using the digit
buttons on your remote control.
5.
When the clock setting is completed, follow the
on-screen instructions to exit.
18
54B0101A_English.indd 18 54B0101A_English.indd 18
/
to select
/
and press
to set your system Date

Automatically switch the TV on or off (On /Off time)

On / Off time switches the TV to power on or standby
at a specified time.
NOTE
• Before using off time function, you have to set the time
on your TV correctly.
1.
Press TV MENU on your remote control and
≥ Time Setup.
select
2.
Press OK or to enter Time Setup.
3.
Press / to select Time and press OK or
to enter.
4.
Press to select and press
Timer
select:
• Both On / Power On Timer / Power Off
Timer: Press to highlight the Power On
Timer or Power Off Timer box and set power
on or off time by using the digit buttons on
your remote control.
• Off: Disable Timer.
5.
Follow the on-screen instructions to exit.

Automatically switch the TV to standby (Sleep timer)

Sleep timer switches the TV to standby after a defined
period of time.
1.
Press TV MENU on your remote control and
≥ Time Setup.
select
2.
Press OK or to enter Time Setup.
/
3.
Press to select Sleep Timer.
/
4.
Press to select the period of time before
TV enters to standby.
5.
Follow the on-screen instructions to exit.

No Operation Power Off

When the Set and Remote key operation are not
operated with specified period by this setting (1/2/4
Hours), the power status is changed to stand by mode
automatically.
1.
Press TV MENU on your remote control and
≥ Time Setup.
select
2.
Press OK or to enter Time Setup.
3.
Press / to select No Operation Power Off.
/
4.
Press to select the period of time before
TV enters to standby.
5.
Follow the on-screen instructions to exit.
/
to
2/27/2010 17:23:28 2/27/2010 17:23:28