Speaker/Amplifier Connection - Sharp Aquos LC-32DH66E Operation Manual

Connecting external devices

Speaker/amplifier connection

Connect an amplifier with external speakers as shown below.
E
Connecting an amplifier with digital audio
input
Optical audio cable
Amplifier with
digital audio input
E
After connecting
Digital audio output setting
After connecting an amplifier with digital audio
input and external speakers as shown, you should
set an audio output format compatible with
the programme you are watching or the device
connected.
Go to "MENU" > "Option" > "Digital Audio
Output" > select "PCM" or "Dolby Digital".
NOTE
• When you set this to "Dolby Digital", and you receive
the Dolby Digital or Dolby Digital Plus audio formats,
Dolby Digital audio is output. Otherwise, PCM audio is
output.
When you set this to "PCM", PCM audio is output no
matter what audio formats you receive.
18
DIGITAL AUDIO IN
E
Connecting an amplifier with analogue
audio input
Audio cable
R L
AUX OUT
Amplifier with
analogue audio input
R L
AUX1 IN