Table of Contents
Advertisement
TV menu
Picture
Adjust picture settings
1.
Press
TV MENU on the remote control and
select
.
2.
Press
OK or
to enter the list.
Picture
Option
Lock
/
3.
Press
to select one of the following
settings:
•
Picture Preference: See right colum.
•
Brightness:
Changes the level of light in the
picture.
•
Contrast:
Changes the level of bright parts in
the picture keeping the dark parts unchanged.
•
Colour: Changes the level of saturation.
•
Tint:
Changes the colours to reddish or bluish.
•
Sharpness:
Changes the level of sharpness of
fine details.
•
Colour Temperature:
/
and press
item: Sets the colour temperature to Cool
(bluer), Medium (balanced), Warm (redder),
Memory (R Gain / G Gain / B Gain).
•
Advanced Settings:
/
and press
item:
*
DNR:
Filters and reduces the noise in the
picture. Selects the level to Low / Medium /
High. Or select Off to disable this function.
*
Blue Back:
sound if the signal is weak or absent.
*
Back Light:
or darker.
*
HDMI Mode:
•
DBC:
Change the Black level automatically
acording to the brightness an image.
•
PC:
Press OK or
select one of the following item:
*
Auto Adjust:
Phase and Clock are adjusted automatically
as per the input PC video signal.
When PC-input mode was selected and a
PC-signal was input, Auto Adjust will be
performed automatically.
*
Hor Position:
of the image.
54B0101A_English.indd 13
54B0101A_English.indd 13
Standard
50
85
50
0
0
On
Press OK or
to enter
to select one of the following
Press OK or
to enter
to select one of the following
Auto blue screen and mute the
Adjusts the background brighter
See right colum.
/
to enter and press
to
Hor Position, Ver Position,
To adjust the horizontal placing
*
Ver Position:
To adjust the vertical placing of
the image.
*
Phase:
Eliminates the horizontal (PHASE)
interfering lines.
*
Clock:
Eliminates the vertical (CLOCK)
interfering lines.
•
Reset:
Select "Reset" to reset Picture
Preference, Brightness, Contrast, Colour, Tint,
Sharpness, Colour Temperature and Back Light
to the factory preset values.
4.
Press
/
to select / adjust the item to the
desired level.
5.
Follow the on-screen instructions to exit.
NOTE
•
When the DBC function is ON, the backlight cannot be
adjusted.
Use smart picture
Apart from manually adjusting picture settings, you can
use Picture Preference to set your TV to a predefined
picture setting.
1.
Press
TV MENU on the remote control and
select
.
2.
Press
OK or
to enter
Preference.
/
3.
Press
to select one of the following
settings:
•
Sport
•
Standard
•
Movie
•
Memory
4.
Follow the on-screen instructions to exit.
HDMI overscan
When you watch TV via HDMI input source, you could
use this function to enlarge the picture. It may have few
loss of video content.
1.
Press
TV MENU on the remote control and
≥ Advanced Settings ≥ HDMI
select
Mode.
/
2.
Press
to select Auto, PC or Video.
3.
Follow the on-screen instructions to exit.
and select Picture
13
2/27/2010 17:23:25
2/27/2010 17:23:25
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
