Scart Connection; Pc Connection By Hdmi (Dvi); Hdmi Connection; Speaker/Amplifier Connection - Sharp LC-32FH500E Operation Manual

Connecting external devices

SCART connection

Example of connectable devices
● VCR ● Decoder (only SCART 1)
● DVD player/recorder
SCART cable
Decoder
NOTE
• In cases when the decoder needs to receive a signal from
the TV, make sure to select the appropriate input terminal to
which the decoder is connected in "Input Source" (Page 10).
PC connection through HDMI (DVI)
HDMI (DVI) Connection
HDMI-certified cable
DVI/HDMI Cable
ø 3,5 mm stereo mini jack cable
PC compatibility chart
Resolution
VGA 640 g 480
720 g 400
VGA
800 g 600
SVGA
1.024 g 768
XGA
1.360 g 768
WXGA
SXGA 1.280 g 1.024
1.400 g 1.050
SXGA+
1.600 g 1.200
UXGA
1.920 g 1.080
1080p
SCART 1
(AV / RGB)
HDMI 1 or 2
AUDIO IN
HDMI (DVI)
Horizontal Vertical
Frequency Frequency
31,5 kHz 60 Hz
31,47 kHz 70 Hz
37,9 kHz 60 Hz
48,4 kHz 60 Hz
47,7 kHz 60 Hz
64,0 kHz 60 Hz
65,3 kHz 60 Hz
75,0 kHz 60 Hz
67,5 kHz 60 Hz
2008/12/16 13:50:06
VGA, SVGA, XGA, WXGA, SXGA, SXGA+ and
UXGA are registered trademarks of International
Business Machines Corporation.
NOTE
• This TV has only limited PC compatibility, correct operation
can only be guaranteed if the video card conforms exactly
to the VESA 60 Hz standard. Any variations from this
standard will result in picture distortions.
● ●
After connection
●
If after connecting a PC to the TV through a HDMI cable,
the audio does not run, connect a mini stereo connector of
ø 3.5mm between TV and PC as indicated in the previous
drawing.
●
When a PC is connected to the TV with a DVI cable, it
will be necessary to connect a mini stereo connector of ø
3.5mm of the TV to PC as indicated in the previous drawing
Speaker/amplifier connector
Example of connectable devices
● Connecting an amplifier with digital audio
input
Connect an amplifier with external speakers as shown
below.
Audio cable
SPDIF
Amplifier with digital
audio input
● ●
After connecting
Digital audio output setting
After connecting an amplifier with digital audio input and
external speakers as shown, you should set an audio
output format compatible with the programme you are
watching or the device connected.
Go to "MENU" > "SOUND" > "SPDIF Mode" >
select "PCM" or "Dolby Digital".
NOTE
• When you set this to "Dolby Digital", and you receive
the Dolby Digital or Dolby Digital Plus audio formats,
Dolby Digital audio is output. Otherwise, PCM audio is
output.
When you set this to "PCM", PCM audio is output no
matter what audio formats you receive.
DIGITAL
AUDIO
OUTPUT
SPDIF
15