Introduction; Accessing The Users Manual; Contacting Fluke - Fluke 789 Overview

Introduction

WWarning
Read "Safety Information" before using the
meter.
The Fluke 789 ProcessMeter™ (referred to as "the
meter") is a handheld, battery-operated tool for measuring
electrical parameters, supplying steady or ramping
current to test process instruments, and providing a > 24
V loop power supply. It has all the features of a digital
multimeter, plus current output capability.
If the meter is damaged or something is missing, contact
the place of purchase immediately. Contact a Fluke
distributor for information about DMM (digital multimeter)
accessories. To order replacement parts or spares, see
Table 8 near the end of this manual.

Accessing the Users Manual

The 789 Users Manual is available on the 789 CD-ROM
shipped with the ProcessMeter. If AutoRun is disabled on
your computer, from the Start menu, select Run, (CD-
Drive letter):\launch.exe <Enter>.
If the CD-ROM is damaged or you are unable to access
the product documentation from the CD-ROM, refer to the
phone numbers listed under "Contacting Fluke" or visit
www.fluke.com to obtain product documentation.

Contacting Fluke

To contact Fluke, call one of the following telephone
numbers:
Technical Support USA: 1-800-44-FLUKE (1-800-
443-5853)
Calibration/Repair USA: 1-888-99-FLUKE (1-888-
993-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-446-5500
ProcessMeter
1