Fluke ProcessMeter 789 Safety Information Manual

Go to www.fluke.com
information.
A Warning identifies conditions and procedures that are dangerous to
the user.
To prevent possible electrical shock, fire, or personal injury:
•
Read "Safety Information" before using the meter.
•
Do not use the meter if it is damaged. Before using the
meter, inspect the case. Look for cracks or missing
plastic. Pay particular attention to the insulation
surrounding the connectors.
•
Make sure the battery door is closed and latched
before operating the meter.
•
Remove test leads from the meter before opening the
battery door.
•
Inspect the test leads for damaged insulation or
exposed metal. Check test lead continuity. Replace
damaged test leads before using the meter.
•
Do not use the meter if it operates abnormally.
Protection may be impaired. When in doubt, have the
meter serviced.
•
Do not operate the meter around explosive gas, vapor,
or dust.
•
Do not use in a damp or wet environment.
•
Use only type AA batteries, properly installed in the
meter case, to power the meter.
•
When servicing the meter, use only specified
replacement parts.
•
Use caution when working above 30 V ac rms, 42 V ac
pk, or 60 V dc. Such voltages pose a shock hazard.
•
When using the probes, keep fingers behind the finger
guards on the probes.
•
Connect the common test lead before connecting the
live test lead. When disconnecting test leads,
disconnect the live test lead first.
PN 4276668
August 2012
© 2012 Fluke Corporation. All rights reserved.
All product names are trademarks of their respective companies.
ProcessMeter

Safety Information

to register your product and find more
 Warning
789