Opening Lists With The Message Key - Siemens Gigaset C590 IP User Manual

Opening lists with the message key

Use the message key f to open the following lists:
u
Network mailbox, if your network provider supports this function and quick dial
is set for the network mailbox
u
Incoming message list
u
Missed calls list
u
Missed alarms list
An advisory tone sounds as soon as a new entry appears on a list. The f key
flashes (it goes off when the key is pressed). In idle status, the display shows an icon
for the new message:
Icon
Ã
™
Ë
The number of new entries is displayed under the corresponding icon.
œ
Ã
02 10
Please note
If calls are saved in the network mailbox, you will receive a message if the appro-
priate settings have been made (see your network provider user guide).
After pressing the message key f, you can see all lists containing messages and
the network mailbox lists.
Lists containing new messages are at the top of the list and are marked in a bold
font.
Messages & Calls
Calls:
Missed Alarms
SMS:
Back
Select a list with q. To open, press
(
¢
( page 95)
New message ...
... on the network mailboxes
... in the Missed Calls list
... in the SMS list or e-mail list
... in the Missed Alarms list
¾
08
09
(3)
(1)
(2)
OK
¢
page 119).
§OK§
.
Using lists
69