Changing The Name Of An Internal Party; Changing The Internal Number Of An Internal Party - Siemens Gigaset C590 IP User Manual

Changing the name of an internal party

The names "INT 1", "INT 2" etc. are assigned automatically on registration. You can
change these names. The name must be no more than 10 characters. The changed
name is displayed in every handset's list.
u
s
§Options§
Rename
~
§Save§

Changing the internal number of an internal party

A handset is automatically assigned the lowest free internal number from 1–6 dur-
ing registration. If all numbers are in use, then the number 6 is overwritten as long
as this handset is in idle status. You can change the internal numbers of all regis-
tered handsets (1–6).
u
§Options§
Assign Handset No.
q
r / ~ Select or enter the internal number.
q r
§Save§
You will hear the error tone if an internal number has been assigned twice.
¤
Repeat the procedure with a free number.
Open the list of handsets. Your own handset is indicated by
Select handset.
Open menu.
Enter the name.
Press the display key.
Open the list of handsets. Your own handset is indicated by
Open menu.
§OK§
Select and press .
Select the handset, if necessary.
Switch to another handset, if necessary, and select the number etc.
Press the display key to save the entry.
Connecting/using other handsets
f
.
f
.
133