Configuring Settings For The Next Call; Configuring Settings During An External Call - Siemens Gigaset C590 IP User Manual

Configuring settings for the next call

Activating "anonymous calling" for the next call
You can withhold your phone number for the next call (CLIR = Calling Line Identifi-
cation Restriction). The setting applies to all the phone's connections.
In idle status:
¢
v Ç Select Services
~
/ c Press the display or talk key. The number is dialled.
§Dial§
Generally, you can withhold your number for all calls,

Configuring settings during an external call

Please note
For VoIP telephony, the services described below are only available if parallel IP
connections are permitted.
Accepting a waiting call (only VoIP)
You are making an external call and hear the call waiting tone.
§Accept§
Once you have accepted the waiting call, you can switch between the two callers
("Call swapping (only
("Conference"
Please note
u
Without CLIP, a waiting call is only announced with a signal tone.
u
An internal, waiting call is shown on the display. You can neither accept the
internal call nor reject it.
u
For instructions on accepting a waiting external call during an internal call,
¢
Rejecting a waiting call (only VoIP)
You can hear the call waiting tone but do not want to speak to the caller.
§Reject§
The caller hears the busy tone.
Please note
You can also press the end call key a to end the current call, and then press
the talk key c again to accept the second call.
¢
Select and press
Enter the number or copy from the directory.
Press the display key.
VoIP)"
¢
page 65).
page 132.
Press the display key.
Making calls using network services
Nxt Call Anonymous
§OK§
.
¢
page 64) or speak to both at the same time
¢
page 59.
63