Ending A Call; Accepting A Call - Siemens Gigaset C590 IP User Manual

Ending a call

a

Accepting a call

An incoming call is indicated in three ways: By ringing, by a display on the screen
and by the flashing speaker key d.
Please note
Only calls to the receive connections assigned to the handset are signalled
¢
( page
The following applies in particular if VoIP connections are configured on your
base:
u
If you have not assigned the receive connections on your phone, all incom-
ing calls are signalled on all registered handsets.
u
If you have assigned connections but not assigned a connection to any
handset as the receive connection, calls on this connection will not be sig-
nalled.
u
If a call cannot be assigned to any connection on the phone, this call is sig-
nalled on all handsets.
Accept the call by:
¤
Pressing the talk key c.
¤
Pressing the speaker key d.
To deactivate the ringtone, press the
long as it is displayed on the screen.
If you press the end call key a, a call to a VoIP connection is rejected. For a call
to the fixed line connection, only the ringtone is deactivated as with
Press the end call key.
151).
§Silence§
display key. You can accept the call as
Making calls
§Silence§
.
53