Siemens Gigaset C590 IP User Manual page 34

2. Connection wizard
The connection wizard enables you to assign previously configured connections
(fixed line connection, Gigaset.net and VoIP connections,
¢
page 24) to internal parties as receive and, if applicable, as send connections.
Internal parties are the registered handsets.
u
Receive connections are the phone numbers (connections) on which you can
be called. Incoming calls are only forwarded to the internal parties (end devices)
for which the relevant connection is assigned as receive connection.
u
Send connections are the numbers that are sent to the called party. The net-
work provider calculates charges based on the send connections. You can assign
each internal party a number or the associated connection as a send connec-
tion.
u
Each connection (number) of your phone can be both a send as well as a receive
connection. You can assign each connection to several internal parties as send
and/or receive connection.
Default assignment
All configured connections are assigned as receive connections to the handsets at
registration/start-up.
The fixed line connection is assigned to the handsets as a send connection.
Starting the connection assistant
a.
Connection Assist.
Assign connections
to handset
INT1?
No
?
Yes
¢
page 56
¤
Press the display key
wish to change the setting for the
send and receive connections of
the handset with the internal
name INT1.
¤
Press the display key
not wish to change the setting for
this handset.
First steps
and
§Yes§
if you
§No§
if you do
33