Table of Contents
Advertisement
Resetting the system PIN
If you have forgotten your system PIN, you
can reset the base to the original code 0000:
Disconnect the power cable from the base.
Hold down the registration/paging key on
the base while reconnecting the power
cable to the base. Hold down the key for at
least 5 seconds.
The base has now been reset and the system
PIN set to 0000.
Please note
All handsets are de-registered and must
be re-registered. All settings are reset to
the factory settings.
•
Resetting the base to the
factory settings
When the settings are restored:
u
Date and time are retained
u
Handsets are still registered
u
Eco Mode is activated and Eco Mode+ is
deactivated,
u
The system PIN is not reset.
Ï
¢
¢
v
System
~
Enter the system PIN and
§OK§
press
§Yes§
Press the display key.
Setting the base
¢
Base Reset
.
75
Advertisement
Table of Contents
