Call Divert (Cd); Consultation Call, Call Swap - Siemens Gigaset S800 User Manual

Making calls using network services

Call divert (CD)

When diverting a call, the call is forwarded to
another connection.
The following options are available:
u
All Calls: Calls are diverted immediately.
No more calls are signalled on your
phone.
u
No Answer: Calls are diverted if no one
accepts the call within several rings.
u
When Busy: Calls are forwarded when
your line is busy. Call is diverted without a
call waiting tone.
¢ ¢
v Ç
All Calls
¤
You can enter data in the following fields:
When:
Select All Calls / When Busy / No Answer.
Phone Number:
Enter the number to which the call is to
be diverted.
Status:
Activate/deactivate call divert.
§Send§
Press the display key.
a
After the announcement, press
the end call key.

Consultation call, call swap

These functions enable you to:
u
Call a second external caller (consultation
call)
u
Switch between two calls (call swap)
Consultation call
You can call a second external caller. The first
call is placed on hold.
During an external call:
§Ext.Call§
Press the display key.
The previous call is placed on
hold. The other participant
hears an announcement.
~
Enter the second participant's
telephone number.
34
¢
Call Divert
The phone number is dialled. You are con-
nected to the second participant.
If the caller does not answer, select the dis-
§End§
play key to return to the first participant.
Please note
You can also select the second partici-
pant's phone number from the directory
¢
or the call list ( page 38).
Ending a consultation call
¢
§Options§
End Active Call
You are reconnected to the first caller.
You can also end the consultation call by
pressing the end call key. The connection is
briefly interrupted and you will receive a call
back. Once you have pressed the talk key,
you are reconnected to the first caller.
Call swap
You can speak to both callers one at a time
(call swap).
Prerequisite: You are conducting an exter-
nal call and have called a second participant
(consultation call) or have accepted a wait-
ing call.
¤
Use q to swap between the participants.
The caller you are currently speaking to is
æ
marked with the
Ending the current call.
¢
§Options§
End Active Call
You are re-connected to the waiting caller.
icon.