Using Bluetooth Devices - Siemens Gigaset S800 User Manual

Sensitivity:
Select noise level sensitivity (Low or
High).
¤
§Save§
Press to save the settings.
When the room monitor function is acti-
vated, the idle display appears as shown
below:
i à V
07:15
Á
INT 1 22 Oct
Room Monitor
0891234567
OFF Options
Changing the set destination
number
É
¢ ¢
v
Room Monitor
¤
Enter and save number as described in
"Activating the room monitor and enter-
ing the destination number"
¢
( page 64).
Cancel/deactivate room monitor
Press the end call key a to cancel the call
when the room monitor is activated.
In idle status, press the display key
deactivate room monitor mode.
Deactivating the room monitor
remotely
Prerequisites: The phone must support tone
dialling and the room monitor should be set
for an external destination number.
¤
Accept the call from the room monitor
and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There are no further room
monitor calls. The other room monitor set-
tings on the handset (e.g., no ringtone) will
remain activated until you press the display
§OFF§
key on the handset.
To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
with

Using Bluetooth devices

Your Gigaset handset can communicate
wirelessly via Bluetooth™ with other devices
using this technology.
Before you can use your Bluetooth devices,
you must first activate Bluetooth and then
register the devices to the handset.
You can register 1 Bluetooth headset to the
handset. You can also register up to 5 data
devices (PC, PDA) to send and receive direc-
tory entries as vCards or exchange data with
the computer (
To use the phone numbers, dialling codes
(country and area code) must be stored in
the directory (
You will find a description of how to operate
your Bluetooth devices in the user guides for
these devices.
u
You can operate headsets on your
handset that have the headset or
speaker profile. If both profiles are
available, the speaker profile will be
§OFF§
to
used to communicate.
u
It can take up to 5 seconds to create a
connection between your handset
and a Bluetooth headset. This applies
both when a call is accepted using
the headset or transferred to the
headset, and when a number is
dialled from the headset.
Using Bluetooth devices
¢
§Save§
( page 64).
¢
page 84).
¢
page 73).
Please note
65