Table of Contents
Advertisement
Listening to the radio
ON /
ON /
STAND-BY
STAND-BY
TUNING
TUNING
PRESET
PRESET
MEMORY
MEMORY
■ Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button on main unit repeatedly or
press the TUNER/BAND button on remote control to
select the TUNER mode.
3
Press the TUNING (
desired station.
Manual tuning:
Press the TUNING (
required to tune in to the desired station.
Auto tuning:
When the TUNING (
or
than 0.5 seconds, scanning will start automatically and
the tuner will stop at the first receivable broadcast
station.
Notes:
●
When radio interference occurs, auto scan tuning may
stop automatically at that point.
●
Auto scan tuning will skip weak signal stations.
●
To stop the auto tuning, press the TUNING (
button again.
●
When an RDS (Radio Data System) station is tuned in,
the frequency will be displayed first, and then the RDS
indicator will light up. Finally, the station name will
appear.
●
Full auto tuning can be achieved for RDS stations
"ASPM", see page 31.
●
Tuning will stop when reach to 87.50 MHz or 108.00
MHz.
ON /
ON /
OPEN / CLOSE
OPEN / CLOSE
STAND-BY
STAND-BY
1
2
3
4
5
6
7
8
9
DIRECT
DIRECT
0
10
10
TUNING
TUNING
TUNING
TUNING
TUNING
TUNING
PRESET
PRESET
PRESET
PRESET
PRESET
PRESET
PRESET
PRESET
SETUP
SETUP
OSD/(TV OUT)
OSD/(TV OUT)
AUDIO
AUDIO
PRESET
PRESET
EQUALIZER
EQUALIZER
(X-BASS)
(X-BASS)
VOLUME
VOLUME
CLOCK / TIMER
CLOCK / TIMER
MEMORY
MEMORY
SLEEP
SLEEP
TOP MENU
TOP MENU
MENU/PBC
MENU/PBC
ENTER
ENTER
SUB TITLE
SUB TITLE
/ DIGEST
/ DIGEST
/ DISPLAY
/ DISPLAY
RETURN
RETURN
TUNER/BAND
TUNER/BAND
TUNER/BAND
TUNER/BAND
AUX
AUX
RDS
RDS
DVD/USB
DVD/USB
ASPM / PTY
ASPM / PT
DISP
DIS
ZOOM
ZOOM
ANGLE
ANGLE
RANDOM
RANDOM
SLOW
STEP
A-B
or
) button to tune in to the
or
) button as many times as
) button is pressed for more
or
To receive an FM stereo transmission:
Press the TUNER/BAND button to select FM mono, FM
stereo or AM.
●
"
" will appear when an FM broadcast is in stereo.
●
If the FM reception is weak, press the TUNER/BAND
button to extinguish the "ST" indicator. The reception
changes to monaural, and the sound becomes clearer.
FM stereo mode indicator
■ Memorising a station
You can store 40 AM and FM stations in memory and recall
them at the push of a button. (Preset tuning)
1
Perform steps 1 - 3 in "Tuning".
2
Press the MEMORY button.
3
Within 5 seconds, press the PRESET
button to select the preset channel number. Store the
stations in memory, in order, starting with preset
channel 1.
4
Press the MEMORY button to store that station in
memory. If the "MEMORY" and preset number
indicators disappear before the station is memorised,
repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a
preset station. When a new station is stored in the
memory, the station previously memorised for that
preset channel number will be erased.
Note:
The backup function protects the memorised stations for a
few hours should there be a power failure or the AC power
lead become disconnected.
■ To recall a memorised station
Press the PRESET (
seconds to select the desired station.
)
E-30
FM stereo receiving indicator
or PRESET
or
) button for less than 0.5
Advertisement
Table of Contents
