Changing The Setup Menu - Sharp XL-DV100NH Operation Manual

Changing the setup menu (continued)
■ TV type setting
Indicator
AUTO Select this mode for the multi-system TV.
NTSC Select this mode for the NTSC TV.
PAL Select this mode for the PAL TV.
■ Language setting
Indicator
OSD A language for screen display can be set
LANGUAGE for the setup menu, messages, etc.
English
LOADING
AUDIO A language for audio can be set.
You can specify a language for
conversation and narration.
English
SUBTITLE A language for subtitle can be set.
The subtitles are displayed in a specified
language.
English
Thank you
DISC A language for disc menus can be set.
MENU Menu screens are displayed in a specified
language.
English
Setting
Setting
French
CHARGEMENT
French
French
Merci
French
CAST ACTEURS
STAFF PERSONNEL
■ Parental setting
1
Select "PREFERENCES" on the setup menu screen
(see steps 1 - 4 on page 8).
2
After selecting "PARENTAL" in step 4 on page 8, select
the parental level and press the ENTER button.
3
Enter a 6-digit password using the Direct Search
buttons and press the ENTER button.
* If this is the first time, enter "000000".
Indicator
1 KID SAFE Only DVD software intended for children
can be played back.
2 G to 7 Only DVD software intended for general
NC-17 use and children can be played back.
8 ADULT DVD software of any grade (adult/
general/ children) can be played back.
Note:
Whilst playing a disc with parental lock, the display may
appear requesting a password in order to watch some
restricted scenes. In such case, enter the password to
temporarily change the parental level.
■ Password setting
From the setup menu, select "PASSWORD SETUP
PAGE", "PASSWORD" and then "CHANGE". A screen
appears.
- - PASSWORD SETUP PAGE - -
PASSWORD MODE ON
PASSWORD
GO TO PASSWORD SETUP PAGE
1
Enter the old password using the Direct Search buttons.
(If this is the first time, enter "000000").
2
Enter the new password using the Direct Search
buttons.
3
Enter the new password again for confirmation.
Note:
When you forget your password, follow below sequence.
At setup menu, select "PASSWORD SETUP PAGE",
"PASSWORD" and then "CHANGE".
1
Enter the old password as "000000" using the Direct
Search buttons.
2
Enter the new password.
3
Enter the new password again for confirmation.
E-11
Setting
- - PASSWORD SETUP PAGE - -
PASSWORD MODE ON
PASSWORD CHANGE
CHANGE PASSWORD
OLD PASSWORD
NEW PASSWORD
CONFIRM PWD