System Connections - Sharp XL-DV100NH Operation Manual

System connections

Make sure to unplug the AC power lead before making any connections.
(not supplied)
To component
video input
sockets
Video cable
(supplied)
To video input
socket
To S-video
input socket
(commercially
available)
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)
■ Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and
position the FM aerial wire in the direction where the
strongest signal can be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM terminal. Position
the AM loop aerial for optimum reception. Place the AM
loop aerial on a shelf, etc., or attach it to a stand or a wall
with screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead
may cause noise pickup. Place the aerial away from the
unit for better reception.
75 ohms coaxial cable
■ External FM aerial
Use an external FM aerial if you require better reception.
Consult your dealer.
Note:
When an external FM aerial is used, disconnect the
supplied FM aerial wire.
E-6
External FM aerial
(commercially available)
(commercially available)
(not supplied)
To audio output
sockets
To coaxial digital
audio input socket
(White)
AM loop aerial
(Black)
FM aerial
Right speaker
Left speaker
Black
Red
To SCART input socket