Timer And Sleep Operation (Remote Control Only) - Sharp XL-DV100NH Operation Manual

Timer and sleep operation (Remote control only)

ON / ON /
STAND-BY STAND-BY
Timer playback:
The unit turns on and plays the desired source (DISC,
TUNER, USB, iPod) at a preset time.
■ Timer playback
Before setting timer:
1
Check that the clock is set to the correct time (refer to
page 13).
If it is not set, you cannot use the timer function.
2
For timer playback, load the disc to be played back.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button for about 2 seconds.
3
Within 10 seconds, press the CLOCK/TIMER button.
4
Press the or
CLOCK/TIMER button.
5
Press the or
press the CLOCK/TIMER button.
6
Switch input with the
TMR" and then press the CLOCK/TIMER button.
7
Press the or
the CLOCK/TIMER button.
8
Press the or
press the CLOCK/TIMER button.
ON / ON /
STAND-BY STAND-BY OPEN / CLOSE OPEN / CLOSE
1 2 3
4 5 6
7 8 9
DIRECT DIRECT
0 10 10
TUNING TUNING TUNING TUNING
PRESET PRESET PRESET PRESET
SETUP SETUP OSD/(TV OUT) OSD/(TV OUT) AUDIO AUDIO
EQUALIZER EQUALIZER
(X-BASS) (X-BASS) VOLUME VOLUME CLOCK / TIMER CLOCK / TIMER
MEMORY MEMORY SLEEP SLEEP
CLOCK / TIMER CLOCK / TIMER
TOP MENU TOP MENU MENU/PBC MENU/PBC
ENTER ENTER
SUB TITLE SUB TITLE
/ DIGEST / DIGEST
/ DISPLAY / DISPLAY RETURN RETURN
TUNER/BAND TUNER/BAND AUX AUX
RDS
DVD/USB
ASPM / PTY DISP
ZOOM ANGLE RANDOM
SLOW STEP A-B
button to set hour then press the
button to set minute and then
or button to select "OFF-
button to set hour and then press
button to set minute and then
9
To select the timer playback source, switch input with
or button to select "SOURCE", then press the
CLOCK/TIMER button.
10
Press the
(DISC, USB, Tuner, iPod) then press the CLOCK/
TIMER button to confirm.
11
If "TUNER" is selected, press the CLOCK/TIMER
button to enter the preset selection mode.
12
To select a preset channel number, press the
PRESET /
press the CLOCK/TIMER button.
13
The " " indicator lights up and the unit is ready for
timer playback.
14
Press the ON/STAND-BY button to enter the power
stand-by mode. Press the CLOCK/TIMER button to
confirm the timer setting.
15
When the preset time is reached, playback will start.
" " indicator will blink to show timer playback. The
volume will increase gradually until it reaches the last
volume level.
16
When the timer end time is reached, the system will
enter the power stand-by mode automatically.
Checking the timer setting:
1
Press the CLOCK/TIMER button repeatedly to view as
follow:
Cancelling the timer setting:
Press the SLEEP button for 2 seconds. The " " indicator
disappear and the display show "TMR-OFF".
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To
reuse the same setting, press the SLEEP button for 2
seconds.
The " " indicator light up and the display show "TMR-ON".
Notes:
●
After selecting the playback source, when press the
CLOCK/TIMER button to confirm, "SOURCE" will
appear and blink for 2 seconds, then change to last
function.
●
When the preset time is reached, playback will start at
current setting if no selected playback source is made.
●
The volume cannot be preset during timer setting.
E-33
or button to select wake up source
or PRESET / button and then