Selecting Recorder; Operating An Aquos Link Device; Listening With The 1 Bit Theater Rack System (Aquos Audio) - Sharp AQUOS LC-42D83M Operation Manual

AQUOS LINK

Selecting recorder

You can select a recorder for the recording from
several connected recorders.
Repeat steps 1 to 3 in AQUOS LINK Auto
1
power on.
Press a / b to select "Selecting Recorder",
2
and then press ENTER.
Auto Power On Select desired item
Selecting Recorder
Select the recorder, and then press ENTER.
3
Press MENU to exit.
4
NOTE
• If you have connected the 1 BIT THEATER RACK SYSTEM
(AQUOS AUDIO) between the TV and an AQUOS Recorder,
the input source's indication changes from "INPUT4" to
"INPUT4 (Sub)" as it is shown below.
Select desired item
Auto Power On
Selecting Recorder
INPUT4
INPUT4 (Sub)
INPUT5
INPUT4 [1. 0. 0. 0]
INPUT5 [2. 0. 0. 0]
[1. 0. 0. 0]
[1. 1. 0. 0]
[2. 0. 0. 0]

Operating an AQUOS LINK device

AQUOS LINK allows you to operate the HDMI-
connected device with one remote control.
Use the following procedure to start playback.
Press PLAY I to start playback of a title.
1
• See page 54, section "Playback of titles using
AQUOS LINK" if you want to start playback using
the list of the titles of the AQUOS BD Player/
AQUOS Recorder.
Press FWD J to fast forward.
2
Press REV G to reverse.
Press STOP H to stop.
Press POWER to turn the HDMI-connected
device on/off.
Use the following procedure to start recording.
Check the following items before recording.
• Make sure the antenna cable is connected properly.
• Check if the recording media (HDD, DVD, etc.) has enough
capacity for recording a programme.
• Select the equipment for recording in Selecting Recorder.
Press REC E to record a programme.
1
Press REC STOP H to stop recording.
2
Listening with the 1 BIT THEATER RACK
SYSTEM (AQUOS AUDIO)
You can opt to listen to the TV sound only from the
1 BIT THEATER RACK SYSTEM (AQUOS AUDIO).
Press OPTION and the AQUOS LINK menu
1
screen displays.
Press a / b to select "By AQUOS AUDIO SP",
2
and then press ENTER.
AQUOS LINK Menu
Recorder EPG
Top Menu/Title List
Media change
By AQUOS AUDIO SP
By AQUOS SP
Sound mode change
Model select
• The sound from the TV speaker and headphone
terminal is silenced and only the sound from the
1 BIT THEATER RACK SYSTEM (AQUOS AUDIO)
is audible.
• You can use VOL k / l and MUTE ( e ).
53