Aquos Link Connection; Connecting An Aquos Bd Player Via The Aquos Audio; Connecting An Aquos Bd Player; Aquos Link Setup - Sharp AQUOS LC-42D83M Operation Manual

AQUOS LINK

AQUOS LINK connection

First connect the 1 BIT THEATER RACK SYSTEM (AQUOS AUDIO) or an AQUOS BD Player that supports the
HDMI CEC protocol.
NOTE
• Refer to the operation manual of the device to be connected for further details.
• After unplugging connection cables or changing the connection pattern, fi rst turn on the power of the TV with all relevant
device's power turned on. Change the external input source by pressing TV/VIDEO, select the appropriate input source and
verify the audiovisual output.
• The cables illustrated in the following explanation are commercially available items.

Connecting an AQUOS BD Player via the AQUOS AUDIO

HDMI-certifi ed cable
HDMI-certifi ed cable
AQUOS BD Player

AQUOS LINK Setup

AQUOS LINK Auto power on

If this is activated, the One Touch Play function
is enabled. While the TV is in standby mode, it
automatically turns on and plays back the image from
the HDMI source.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "AQUOS LINK Setup",
3
and then press ENTER.
52
Optical AUDIO
cable
1 BIT THEATER
RACK SYSTEM
4
5
6
NOTE
• The factory default for this item is "Off".
Connecting an AQUOS BD
Player
HDMI-certifi ed cable
AQUOS BD Player
Press a / b to select "Auto Power On", and
then press ENTER.
Auto Power On Select desired item
Selecting Recorder
On
Off
Press a / b to select "On", and then press
ENTER.
Press MENU to exit.