Table of Contents
Advertisement
Preparation
About Menu operations
What is Menu?
• You need to bring up the On-Screen Display to perform
settings for the TV. The On-Screen Display for the settings
is called "Menu".
• The Menu enables various settings and adjustments. (See
pages 16 and 17.)
• The Menu can be operated with the remote control unit.
Basic Menu operations
Press MENU and the MENU screen displays.
1
MENU
[Picture]
Picture
Audio
AV Mode
[STANDARD]
OPC
[Off]
Backlight
[+16]
Contrast
[ 30]
Brightness
[
0]
Colour
[
0]
Tint
[
0]
Sharpness
[
0]
Advanced
Reset
Press c / d to select the desired menu, and
2
then press ENTER.
Audio
STANDARD
Treble
[ 0]
-
Bass
[ 0]
-
Balance
[ 0]
L
Surround
Bass Enhancer
Reset
Press a / b to select the desired menu item.
3
Press ENTER to proceed if necessary.
Audio
STANDARD
Treble
[ 0]
-
Bass
[ 0]
-
Balance
[ 0]
L
Surround
Bass Enhancer
Reset
Press a / b or c / d to select the desired item
4
or adjust the item to the desired level. Press
ENTER if necessary.
Press EXIT or MENU to exit the MENU.
5
Press RETURN as necessary to return to the
previous MENUs.
Power Control
Setup
+
+
+
+
Power Control
+
+
R
Power Control
+
+
R
H Using the control panel of the TV
You can also operate the Menu using the control panel
of the TV.
Button operations on the control panel correspond to
the ones on the remote control as shown below.
TV control panel buttons
TV/VIDEO
CH r
CH s
VOL k
VOL l
NOTE
• Menu options differ in the selected input modes, but the
operating procedures are the same.
• The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
About Guide Display
The Guide Display at the bottom of the screen shows
operations with an On-Screen Display.
: S elect
: E nter
: B ack
ENTER
RETURN
The bar above is an operational guide for
the remote control. The bar will change in
accordance with each menu setting screen.
Remote control buttons
ENTER
a
b
d
c
: E nd
MENU
15
Advertisement
Chapters
Table of Contents
