Table of Contents
Advertisement
Connecting a PC
Use the PC terminals to connect a PC.
NOTE
• The PC INPUT terminals are DDC1/2B-compatible.
• Refer to page 61 for a list of PC signals compatible with the TV.
ANALOG
RGB
RGB cable
(commercially available)
Ø 3.5 mm stereo
minijack cable
(commercially available)
AUDIO
(L/R)
PC
Signal names for 15-pin mini D-sub connector
5
4
3
2
1
10
9
8
7
6
15
14
13
12
11
Displaying a PC image on the screen
A-TV
D-TV RADIO
56
Pin No.
Signal name
R
G
B
Not connected
CSYNC
NOTE
• Macintosh adaptor may be required for use for some Macintosh computers.
• Pin No. 5 is not used for inputting the signal.
To view an image from a PC, select "INPUT 7" using
TV/VIDEO on the remote control unit or TV/VIDEO on
the TV.
FAV.
When connecting to a PC, the correct input signal type
is automatically detected. (See page 59.)
• Each time TV/VIDEO is pressed, the input source toggles.
Pin No.
Signal name
GND (Ground)
GND (Ground)
GND (Ground)
+5V
GND (Ground)
A -
TV
D -
TV
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
INPUT6
INPUT6
INPUT7
NOTE
Pin No.
Signal name
Not connected
SDA
HD
VD
SCL
Advertisement
Chapters
Table of Contents
