Selecting A Preset Av Mode - Sharp AQUOS LC-42D83M Operation Manual

Watching TV

Selecting a preset AV MODE

The AV MODE function enables you to select
appropriate settings for audio and video to account for
the system environment which can vary due to factors
like room brightness, type of programme watched or
the type of image input from external equipment.
Using AV MODE on the remote control unit
Press AV MODE.
1
• Present AV MODE displays.
Press AV MODE again before the mode
2
displayed on the screen disappears.
• The mode changes as shown below.
AV input mode
AV Mode: STANDARD
AV Mode: DYNAMIC
AV Mode: DYNAMIC (FIXED)
AV Mode: USER (A-TV)
PC input mode
AV Mode: STANDARD
AV Mode: USER (
Using AV Mode on the menu screen
Press MENU and the MENU screen displays.
1
Press c / d to select "Picture".
2
Press a / b to select "AV Mode", and then
3
press ENTER.
Press a / b to select the desired item, and
4
then press ENTER.
32
AV Mode: MOVIE
AV Mode: GAME
AV Mode: PC
AV Mode: PC
)
Selected item
STANDARD For a highly defi ned image in a normally
bright room
MOVIE For a movie
GAME Lowers image brightness for easier
viewing.
PC For PC. (Available only when inputting an
HDMI or PC signal.)
USER Allows the user to customise settings as
desired. You can set the mode for each
input source.
DYNAMIC Changes the image and sound settings to
(FIXED) the factory preset values. No adjustments
are allowed.
DYNAMIC For a clear-cut image emphasising high
contrast for sports viewing.
NOTE
• You can select a different AV MODE item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for VIDEO input.)
• During PC input mode, only "STANDARD", "PC" and
"USER" can be selected under the AV mode selection.
Description