Selecting Recorder; Selecting Channel Key; Audio Return Channel (Arc) - Sharp LC-46LX650H Operation Manual

AQUOS LINK

Selecting recorder

You can select a recorder for the recording from several
connected recorders.
Press MENU and the MENU screen displays.
1
Press c / d to select "Link operation".
2
Press a / b to select "AQUOS LINK setup",
3
and then press ENTER.
Press a / b to select "Selecting recorder", and
4
then press ENTER.
Link operation
Select the recorder, and then press ENTER.
5
Press MENU to exit.
6
NOTE
• If you have connected the AQUOS LINK-compatible audio
system between the TV and a CEC-compatible recorder,
the input source's indication changes from "HDMI 4" to
"HDMI 4 (Sub)" as it is shown below.
Selecting recorder
Selecting recorder for recording
using the [REC] button
HDMI4 (Sub)
[ 1.1.0.0 ]
:Select

Selecting channel key

This function allows you to select the channel of the
connected HDMI device using the TV's remote control.
Press MENU and the MENU screen displays.
1
Press c / d to select "Link operation".
2
Press a / b to select "AQUOS LINK setup",
3
and then press ENTER.
Press a / b to select "Selecting channel key",
4
and then press ENTER.
66
AQUOS LINK setup
AQUOS LINK control
[On]
Auto power on
[Off]
Selecting recorder
Selecting recorder for recording
using the [REC] button
Using genre info
Audio return channel
[Auto]
:Back
Press a / b to select the input source of the
5
connected HDMI device you want to control
using the TV's remote control.
Press c / d to select "On".
6

Audio return channel (ARC)

If this function is set to "Auto", the TV can send audio data for
video content shown on the TV to a connected audio device
with just one ARC-compatible cable. Using this function
eliminates the need to use a separate digital or analogue
audio cable.
Press MENU and the MENU screen displays.
1
Press c / d to select "Link operation".
2
Press a/b to select "AQUOS LINK setup",
3
and then press ENTER.
Press a / b to select "Audio return channel".
4
Press c / d to select "Auto" or "Off".
5
Press MENU to exit.
6
Connection for using "Audio return channel"
You need to use ARC-compatible cables/devices and
connect to the HDMI 1(ARC) terminal to activate this function.
The connection method is the same as the "Connecting an
AQUOS BD player only" on page 65.
NOTE
• The ARC (Audio Return Channel) function works only
when using the HDMI 1(ARC) terminal.