Before Operation; Setting The Clock - Sharp R-65STR Operation Manual With Cookbook

R-65STR English 07/09/2004
Plug in the oven.
1. The oven display will flash:
2. Press the STOP button, the display will show:
x1
3. To set the clock, see below.
4. Heat the oven without food. (See page 10, Note 2).
There are two setting modes: 12 hour clock and 24 hour clock.
1. To set the 12 hour clock, hold the COOKING MODE button down for 3
seconds.
2. To set the 24 hour clock, press the COOKING MODE button once more
after Step 1, in the example below
To set the clock, follow the example below.
Example:
To set the 24 hour clock to 23:35
1. Choose the clock function.
(12 hour clock).
x1 and hold for 3 seconds
3. Press the COOKING
MODE button to change
from hours to minutes.
x1
NOTES:
1. You can rotate the TIMER/WEIGHT/POWER
knob clockwise or counter-clockwise.
2. Press the STOP button if you make a mistake
during programming.
3. If the electrical power supply to your microwave
oven is interrupted, the display will intermittently
10:52 Page 7
will appear in the display.
will appear in the display.
Choose the 24 hour
clock.
x1
4. Set the minutes. Rotate the
TIMER/WEIGHT/POWER
knob until the correct minute
is displayed (35).

BEFORE OPERATION

Using the STOP button
Use the STOP button to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, touch twice.

SETTING THE CLOCK

2. Set the hours. Rotate the TIMER/WEIGHT/
POWER knob until the correct hour is
displayed (23).
5. Press the COOKING
MODE button to start
the clock.
show after the power is reinstated. If
this occurs during cooking, the programme will be
erased. The time of day will also be erased.
4. When you want to reset the time of day, follow the
above example again.
7
x1 and hold
for 3 secs.
x1