Table of Contents
Advertisement
36
Maintaining Your Heater's Appearance
Fingerprints or other marks left on the optional plated surface may become etched in place if they are not
wiped clean prior to turning the heater on. Clean the plated surfaces with denatured alcohol and a soft
cloth (with the heater cool). Other cleaners may leave a film that may become etched into the surface.
Battery Replacement
Receiver Battery Installation
Install four AA batteries into the receiver (see illustration below). These batteries act as a power-backup
in case the household (AC) current goes out.
Control Panel Light Battery
LED lights and a 9v battery are used to illuminate the control panel when the concealment cover is lifted. If the LED
lights do not operate, replace the 9v battery (see the illustration below). The battery holder is held in place with
Velcro and may be removed for easier access.
Transmitter Battery Installation
Install the three included AAA batteries into the remote (see illustration below).
CONTINUOUS
PILOT
GREEN SMART
PILOT
© Travis Industries
Maintenance
BLOWER
ACCENT LIGHT
HIGH
HIGH
OFF
LOW
LOW
The remote
uses 3 AAA
batteries.
ON
REMOTE
OFF
PRG
OFF
4120308
Battery Holder for
Control Panel Lights
The remote receiver
uses 4 AA batteries.
100-01288_000
Advertisement
Table of Contents
