Cd Play - Aiwa CD-CX907M Operating Instructions Manual

CD PLAY

You can play a CD, CD-R, or CD-RW by following
the procedure below.
1
Press OPEN to open the front panel
and insert a CD with the labeled side
upward to start CD play.
z (eject) button
2
Close the front panel.
The track number and elapsed playing time
will be displayed.
Elapsed
Track number
playing time
3
Adjust the volume with the Jog Dial.
Notes
• If a CD is already inserted, press FUNCTION
repeatedly to select CD Play mode to start CD
play.
• Be sure to close the front panel after inserting or
ejecting a CD.
Button operations in CD Play mode
Press
Switching modes
When the unit is in a mode other than CD Play
mode, inserting a CD switches the unit to CD Play
mode automatically.
Notes
• Smaller 3-inch (8-cm) CDs cannot be played on
this unit. And do not use an adaptor, as it may
CD indicator
cause a malfunction.
• When you insert a CD, CD play starts with the
first track on the CD. In other cases (when
switching from the radio operation or turning on
the unit), CD play starts at the point on the CD
where it had stopped previously.
CD operation
indicator • When you insert a CD-R/CD-RW, it may take
longer to start playing.
• A CD-R/CD-RW cannot be played if it contains
no data or data in the wrong format, etc. In those
cases, the indication "ERROR03" appears.
z Eject a CD.
t Skip to the next track with a short press
(for less than 0.5 second).
Each extra press skips forward one
extra track.
To search forward rapidly, press and
hold t until the desired part is
played, then release it.
r Restart the track currently in play with a
short press (for less than 0.5 second).
Each extra press skips backward one
extra track.
To search backward rapidly, press and
hold r until the desired part is
played, then release it.
To
continued
10
ENGLISH