Cd Changer Play (Ct-Fx729M Only) - Aiwa CT-FX719 Operating Instructions Manual

CD CHANGER PLAY
(CT-FX729M only)
You can play discs with this unit by connecting
the optional AIWA ADC-EX1 06, ADC-M60 CD
changer. Make sure that the disc magazine
loaded with the discs is inserted in the connected
CD changer.
To install the unit, refertotheseparate Installation
and Connections manual.
2 1
1 Prees CD to start playing from disc 1.
The disc and track numbers appear.
CD running CD changer
indicator operation indicator
Disc nu~ber Track'number
z Adjust the volume with +/-.
DISCV/A
CD BAND
MUTE ~ M INT ] REP1 I DIR
REP RANDOM
Press following buttons to operate the connected
CD changer.
To switchmodes
To turn the unit off, press and hold MUTE for
more than 2 seconds.
Even if the unit is in Radio or Tape Play mode,
pressing CD switches the unit to CD Changer
Play mode.
If you wish to switch to another mode, press the
following buttons.
– Pressing DIR switches the unit to Tape Play
mode.
- Pressing BAND switches the unit to Radio
mode.
To skip tracks
Buttons
Press* Press and hold
w Skips to the next Advances
track rapidly
Release it to
resume play
M
Skips back to
Reverses
the beginning of rapidly
the current track Release it to
resume play
* Press for less than 0.5 second,
To play otherdisc
To start playing the previous disc in the disc
magazine, press DISC T.
To start playing the next disc, press
DISC A.
The number of the disc appears,
Repeat play
To repeat the current track, press REP1 (the
"REPEAT 1" indication appears).
To repeat the current disc, press REP (the
"REPEAT" indication appears).
To cancel either mode, press the same button
a9ain-
Introplay
Press INT (the "SCAN indication appears). The
first 10 seconds of each track on all the discs in
the disc magazine are played in sequence.
To cancel Intro play, press INT again.
To do this I
Press this button
To pause
To resume
I @@
13
ENGLISH