Press INT during CD play.
The "SCAN" indication lights up, and the first 10
seconds of all the tracks on the CD are played in
When the desired track is found, press INT again.
The unit returns to normal CD play.
Press REP1 during CD play.
The "REPEAT 1" indication lights up, and the
currently selected track is played repeatedly.
Press REP1 again to cancel Repeat play.
If Repeat play is not activated, all the tracks on
the CD are played repeatedly.
Press RANDOM during CD play.
The "RANDOM" indication lights up, and the
tracks on the CD are played in random order.
Press RANDOM again to cancel Random play.
During Random play, even if r is pressed
repeatedly, it won't take you back to previous
tracks, only to the beginning of the current track.
Press SELECT repeatedly to select the
mode that you wish to adjust from:
BASS, TRE (treble), BAL (balance), FAD
(fader) and VOL (volume).
Each time you press SELECT, one of the
following indicators appears, in cyclic order.
If you do not proceed with the following step
2 within 5 seconds, the selected mode is
canceled, and the indication returns to the
current source mode.
Rotate the Jog Dial to adjust the level.
Adjust each mode referring to the audio
control indications in the display window.
level of the right
level of the front
Without selecting any mode with SELECT,
only the volume level can be adjusted by
rotating the Jog Dial.
Press this button to temporarily lower the volume.
Press it again to restore the previous volume.
The "MT" indicator flashes while the mute function
level of the left
level of the rear