Cd Play; Error Displays/Messages Error Displays; Messages - Aiwa CDC-X504MP Operating Instructions Manual

Fm/am compact disc player
Hide thumbs Also See for CDC-X504MP:
Table of Contents

Advertisement

Available languages

Available languages

CD play

A CD cannot be inserted.
• Another CD is already inserted.
• The CD has been forcibly inserted upside down
or in the wrong way.
Play does not begin.
• Defective or dirty CD
• CD-R/CD-RW that is not finalized.
• Some CD-Rs/CD-RWs may not play due to its
recording equipment or the disc condition.
MP3 files cannot be played back.
• Recording was not performed according to the
ISO 9660 level 1 or level 2 format, or the Joliet or
Romeo in the expansion format.
• The file extension ".MP3" is not added to the file
name.
• Files are not stored in MP3 format.
MP3 files take longer to play back than others.
The following discs take a longer time to start
playback.
– a disc recorded with complicated tree structure.
– a disc recorded in Multi Session.
– a disc to which data can be added.
A disc is automatically ejected.
The ambient temperature exceeds 50˚C (112˚F).
The operation buttons do not function.
CD will not be ejected.
Press the reset button.
The sound skips from vibration.
• The unit is installed at an angle of more than 45˚.
• The unit is not installed in a sturdy part of the
car.
The sound skips.
Dirty or defective disc.
ERROR DISPLAYS/

MESSAGES

Error displays
The following indications will flash for about 5
seconds, and an alarm sound will be heard.
ERROR
• A CD is dirty or inserted upside down.
t Clean or insert the CD correctly.
• A CD cannot play because of some problem.
t Insert another CD.
FAILURE
The connection of speakers/amplifiers is incorrect.
t See the installation guide manual of this
model to check the connection.
HI TEMP
The ambient temperature is more than 50˚C
(112˚F).
t Wait until the temperature goes down below
50˚C (112˚F).
NO MUSIC
A CD which is not a music file is inserted in this
unit.
t Insert a music CD in this unit.
OFFSET
There may be an internal malfunction.
t Check the connection. If the error indication
remains on, consult your nearest Sony dealer.
RESET
The CD unit cannot be operated because of some
problem.
t Press the reset button.
Messages
L.SEEK +/–
The Local Seek mode is on during automatic
tuning (page 7).
"
" or "
You have reached the beginning or the end of the
disc and you cannot go any further.
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
"
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents