Cd Changer Play - Aiwa CT-X438 Operating Instructions Manual

CD CHANGER PLAY
You can play CDs with this unit by connecting the
optional AIWA ADC-M55, ADC-M35 compact
disc changer. Make sure that the dk.c magazine
loaded with the discs is inserted in the connected
compact disc changer.
To install the unit, refertotheseparate Installation
and Connections Manual.
2
1
I Press CD to start playing from disc 1.
The discand tracknumbersappear.
[
k
Disc number Track number
z Adjust the volume with +/-.
PWR
DISC
V/A
BAND
K& lNTR~pREPl TAPE CD
Press following buttons to operate the connected
compact disc changer.
TO
do this
Press this button
To pause
a
1
To resume
@
Toswitch
modes
To turn off the unit, press PWR.
Even if the unit is in Radio or Tape Play mode,
pressing CD switches the unit to CD Changer
Play mode.
If you wish to switch to another mode, press the
following buttons.
– Pressing TAPE switches the unit to Tape
Play mode.
– Pressing BAND switches the unit to Radio
mode.
To skip tracks
Buttons Press"
Press and hold
w Skips to the next Advances
track rapidly
Reieases to
resume piay
~
*Press for less than 0.5 eecond.
To piay other disc
To start playing the previous disc in the disc
magazine, press DISC 7.
To start playing the next diet, press
DISC A. The number of the disc (l-6) appears.
Repeat
play
To repeat the current track, press REP (the
"REPEAT" indication appears).
To repeat the current disc, press REP 1.
To deactivate either mode, press the same button
again.
Intro play
Press INT. (The "SCAN indication appears.)
The first f Oseconds of each track on all the discs
in the disc magazine will be played in sequence.
To deactivate Intro play, press INT again.
Note
By pressing one of the following buttons, you can
deactivate Repeat play and Intro play: DISC T,
DISC A, FM, W, INT, REP, REP 1, PWR.
1
ENGLISH
12