Troubleshooting - Aiwa CD-CX907M Operating Instructions Manual

Stereo car cd receiver
Table of Contents

Advertisement

Available languages

Available languages

Remote control button
1 VOLUME 6 button
To increase the volume.
2 VOLUME 7 button
To decrease the volume.
3 FUNCTION button
To select Radio, CD Play, CD Changer Play
or AUX IN mode.
4 DISC/PRESET M button
CD: Press and release to skip back to the
beginning of the current track.
Press again to skip back to the
previous track.
Press and hold to reverse rapidly.
Release to resume play.
CD changer:
Press and release to skip back to the
beginning of the current track or the
previous track.
Press and hold to switch to the
previous CD.
Radio:
Each press of the button tunes in the
next preset station, in descending
order.
5 DISC/PRESET N button
CD: Press and release to skip to the next
track.
Press and hold to advance rapidly.
Release to resume play.
CD changer:
Press and release to skip to the next
track.
Press and hold to switch to the next
CD.
Radio:
Each press of the button tunes in the
next preset station, in ascending order.

TROUBLESHOOTING

Error codes
In the following cases the corresponding error
code indication appears. Follow the suggestions
below to solve the problem. If the error code
indication does not disappear, consult an AIWA
service center.
ERROR01 The disc magazine is not properly
inserted in the CD changer. Reinsert
the magazine.
instruction manual for the CD
changer.
ERROR02 No CDs are loaded in the disc
magazine. Insert CDs properly.
Refer to the instruction manual for
the CD changer.
ERROR03 Focus error. Check that the discs
are loaded properly in the disc
magazine (right side up, etc.).
ERROR04 Problem with the CD changer. Reset
the unit by pressing the Reset button.
If this does not solve the problem,
consult an AIWA service center.
ERROR05 The CD changer is overheated.
Allow the changer to cool off by
moving the vehicle out of direct
sunlight.
Reset button
The Reset button is visible when you detach the
front panel. Try pressing this button if a connected
CD changer does not operate properly. When
you press this button, use the tip of a pointed
object such as a pencil or toothpick.
Note that all your settings stored in memory,
however, will be erased if you press this button.
Reset button
Refer to the
20
ENGLISH

Advertisement

Table of Contents
loading

Table of Contents