Cd Play - Aiwa CD-CRV407 Operating Instructions Manual

Stereo car cd receiver
Hide thumbs Also See for CD-CRV407:
Table of Contents

Advertisement

CD PLAY

You can play a CD, CD-R, or CD-RW by following
the procedure below.
1
Insert a CD with the labeled side upward
to start CD play.
If a CD is already inserted, press FUNC
repeatedly to select CD Play mode to start
CD play.
The track number and elapsed playing time
will be displayed.
CD indicator
Track number Elapsed playing time
2
Adjust the volume with the Jog Dial.
11
ENGLISH
Button operations in CD Play mode
Press
z
Eject a CD.
t
Skip to the next track with a short press
(for less than 0.5 second).
Each extra press skips forward one
extra track.
To search forward rapidly, press and
hold t until the desired part is
played, then release it.
r
Restart the track currently in play with a
short press (for less than 0.5 second).
Each extra press skips backward one
extra track.
To search backward rapidly, press and
hold r until the desired part is
played, then release it.
Switching modes
When the unit is in a mode other than CD Play
mode, inserting a CD switches the unit to CD Play
mode automatically.
Notes
• Smaller 3-inch (8-cm) CDs cannot be played on
this unit. And do not use an adaptor, as it may
cause a malfunction.
• When you insert a CD, CD play starts with the
first track on the CD. In other cases (when
switching from the radio operation or turning on
the unit), CD play starts at the point on the CD
where it had stopped previously.
• When you insert a CD-R/CD-RW, it may take
longer to start playing.
• A CD-R/CD-RW cannot be played if it contains
no data or data in the wrong format, etc. In those
cases, the indication "ERROR03" appears.
To

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cdc-r307

Table of Contents