Page 1
For your convenience, record the model number and serial number (you will find them on the right side of yourset) inthespace provided below. Please referto them when you contact your AIWA dealer in case of difficulty. Model No. [CDC-X145 ‘eria’ ‘“...
Page 2
Welcome Thank you for your purchasing thisAIWA product. To optimize the performance of this unit, please read through this manual carefully. In addition to this operating instructions manual, be sure to refer to the separate installation and connections manuals as well. PRECAUTIONS This unit is designed to be operated on a 12-volt DC negative-ground electrical system only.
TABLE OF CONTENTS FRONT PANEL ... 3 DETACHING AND ATTACHING THE FRONT PANEL ... 4 SE17NG THE CLOCK ... 5 RADIO OPERATION ... 5 PRESETTING STATIONS ... 6 CD PLAY ... 8 SOUND ADJUSTMENTS ... 9 CONNECTING A PORTABLE CASSETTE PLAYER OR OTHER EQUIPMENT ... 10 TROUBLE SHOOTING ...
DETACHING AND ATTACHING THE FRONT PANEL You can detach the front panel from the unit and carry it with you when you leave your car unattended. When you carry the front panel out of your car, use the supplied earring case. Before detaching the front panel, remove the CD to prevent possible damage to the unit.
SETTING THE CLOCK Press PWR to turn the unit on. Press snd hold DISP for more than 2 seconds. Press A to set the hour. Press ~ to set the minutss. Press DISP. The clock starts working from O second. Havingthe clock dispiayedwhiie turned on Press DISP.
turn the unit off Press PWR. PRESETTING STATIONS Press PWR to turn the unit on. Press BAND to select a desired bend from among FMI, FM2, FM3, AM1, and AM2. Preaa and hold A.ME for more than 2 seconds to activate the automatic presetting function.
Page 8
Prees PWR to turn the unit on. Press BAND to select the bend from among FMI, FM2, FM3, AM1, and Tune in the station that you wish to preset with TUNE A or TUNE V. Press one of the preset station buttons for approximately While the station you are presetting is bsing registered...
CD PLAY Insert a disc with the labeled upwsrd to start CD play. If a disc is already inserted, press PWR to start CD play. The track number and elapsed playing time appear. CD indicator Elapeedplayingtime Track riumber Press VOL to project out the control snd turn it to + or - to adjust the...
CD PLAY Press REPEAT during CD play. The’’REPEAT” indicator lights upandthecurrently selected track is played repeatedly. Press REPEAT again to deactivate Repeat play. Note If Repeat play is not activated, all the tracks on the disc are played repeatedly. ENGLISH SOUNDADJUSTMENTS LOUD Press PWR to turn the unit on.
Note Make sure to press VOL to hide the control when you finish sound adjustment. MUTE button Press this button to temporarily Iowerthevolume. Press it again to restore the previous volume. Loudness hmclion Press LOUD to reinforce both bass and treble especially when listening at low volume level.
TROUBLESHOOTING Reset butten The Reset button is visible when you detach the front panel, Try pressing this button if a CD does not operate properly. When you press this button, uae the tip of a pointed object such as a pencil or toothpick.
SPECIFICATIONS RADIOSECTION (FM) FrequencyRange: 87.5 MHz–108MHz (100-kHz steps) 87.5 MHz-108 MHz ~W-t-feteps) Usable Sensitivity: 50 dB Quieting Sensitivity 17.2 dBf IF Rejection: 80 dB Frequency Response 30 Hz-15,OOO Hz 63 dB SIN Ratio StereoSeparation: 35 dB at 1 kHz AlternateChannelSelectivity 70 dB CaptureRatio: 3 dB...
Page 16
88-KC6-901-01 AIWA CO.,LTD. 971029ATM-OX Printed in China...
Need help?
Do you have a question about the CDC-X145 and is the answer not in the manual?
Questions and answers