ATTACHING THE FRONT
You can detach the front panel from the unit and
carry it with you when you leave your car
When you carry the front panel out of your car,
use the supplied carrying case.
Press and hold PWR for more than 2
seconds to turn the unit off.
Press OPEN to open the front panel
and pull it out as illustrated 1 – 3.
• When you leave the front panel open, do not put
anything on the panel.
• When you carry the front panel in the carrying
case, do not drop or apply mechanical shock to
the panel, and never let the panel become wet.
Attaching the front panel
Fit the lower side of the front panel to
its hinge pegs as illustrated 1 – 2.
Close the front panel.
• Do not press OPEN by accident when you push
the front panel to secure it in above procedure.
• Do not touch the connector on the reverse side
of the front panel, as doing so may contaminate
the connector and cause poor connection,
resulting in a malfunction.
When the front panel is detached, you can find an
LED lamp on the front side of the unit. This lamp
is designed to deter theft, and continues to flash
when the front panel is detached. This unit is not
equipped with any other security system, such as
a security alarm, so there are limitations to its