Cylinder Numbering; Fuel Pump Seal - Vetus M3.28 Operation Manual

2 Introduction
VD00153

4 Cylinder numbering

Cylinders are numbered consecutively,
beginning at the front end.
Maximum
rpm adjust-
ment screw
Lead seal
VD00150

5 Fuel pump seal

The manufacturer shall not be held liable
for damages resulting from adjustments
made to the fuel injection pump.
The maximum engine speed adjustment
screw has been sealed to prevent this.
Cylinder numbering, Fuel pump seal
Adjustments to the fuel pump are to be
carried out by authorized Vetus-Mitsubishi
Service specialists only.
7