Vetus M3.28 Operation Manual page 20

3 Use
VD00109
VD00110
12 Starting
Now turn the key further to the '
position.
Release the key as soon as the engine
fires (the key will return to the '
tion) and throttle back.
Leave the key in this position while the
engine is running.
18
W
arNiNg
Release the key if the engine does
not fire within 10 seconds. Wait until
the starter motor has stopped running
completely before turning the key to
the ' ' position again. Never allow
start
the starter motor to run for more than
30 seconds consecutively.
' Check that the indicator lights for oil pres-
start
sure and alternator are off. Cooling water
should now flow out of the exhaust; if this
is not the case, stop the engine immedi-
' posi- ately. Before submitting the engine to full
oN
load it should be brought up to operating
temperature as quickly as possible by
running at 3/4 of maximum revs.
turn the main switch off while the engine
is running.
W
arNiNg
Never turn the key to the '
tion while the engine is running.
Doing so will damage the starter
motor.
The instrument panel is provided with the
following instruments (Depending of the
type of panel, see page 10).
Never
Starting
' posi-
start