Specifying Alarm Input; Alarm In Setting - Sanyo VCC-WD8574 Instruction Manual

Specifying Alarm Input

If you have connected an external door switch or an infrared sensor to the ALARM IN (alarm input) terminal on the rear panel,
specify the following settings. (For connecting alarm devices, see page 10; for the "Alarm Output" settings, see page 44).
This unit has a built-in motion sensor, which outputs alarm signals when any moving subject, such as would be intruder, is
detected. You should adjust the mask settings or detection sensitivity using "MOTION SET", especially when false alarms
occur very frequently.
MAIN MENU
LANGUAGE
TITLE
SYNC
EXPOSURE
DAY/NIGHT
WHITE BALANCE
ALARM
OPTION
ALARM
PRESET
MENU
(SET)

ALARM IN SETTING

1 1
1 1
Set "MODE" to "ALM" or "COLOR".
ALM : Alarm Input Mode (Normal usage)
COLOR : Mode in which you can switch between COLOR and
B/W externally by using the ALARM IN terminal.
(See page 43)
SET
OFF
INT
SET
AUTO
ATW
SET
SET
SET
OFF
END
ALARM IN SETTING
MODE ALM
POLARITY NO
MOTION OFF
MOTION SET SET
ZOOM OFF
ZOOM TIME 5S
DURATION 5S
For accessing the MAIN MENU, see page 13 – 14.
ALARM SETTING
ALARM IN
ALARM OUT
ALARM SIGN
ALARM IN
PRESET
MENU
(SET)
2 2
2 2
Select "MOTION SET" – "SET" and press the SET
button.
RThe "MOTION SETTING" screen appears.
SET
OFF
OFF
SET
OFF
BACK
ALARM IN SETTING
MODE ALM
POLARITY NO
MOTION OFF
MOTION SET SET
ZOOM OFF
ZOOM TIME 5S
DURATION 5S
English
SET
38