Specifications - Sanyo VCC-WD8574 Instruction Manual

Color ccd camera
Table of Contents

Advertisement

Available languages

Available languages

Specifications

Pickup device
1/3" CCD
Effective pixels
768 (H) x 494 (V), NTSC
Horizontal resolution
More than 480 TV lines
Electronic zoom
x2.5 (with Alarm Zoom Function)
Internal synchronization/Line lock, V phase
Synchronization
method
adjustment possible
1.0 lx (F1.2, COLOR mode, Normal Gain)
0.5 lx (F1.2, COLOR mode, High Gain)
0.025 lx (F1.2, COLOR mode, x40 electronic
sensitivity increased, Normal Gain)
Lowest image
illumination
0.05 lx (F1.2, B/W mode, Normal Gain)
0.025 lx (F1.2, B/W mode, High Gain)
0.002 lx (F1.2, B/W mode, x40 electronic sensitivity
increased, Normal Gain)
S/N
More than 50 dB (with AGC OFF)
Backlight
OFF/Center-weighted metering/ Multi-spot metering
compensation
WIDE-D
OFF/ON (For auto iris only)
1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000,
Electronic shutter
1/10000
Iris function
AI/EI
AUTO/OFF, works with auto iris
Electronic sensitivity
boosting
Up to x40 setting possible
Auto Tracing White balance (ATW),
Auto Tracing White balance-All (ATW-A),
White balance
One-push (AWC), Manual White Balance (MWB),
Indoor (3200), Outdoor (5600),
Fluorescent lighting (FLUE)
AGC gain
HIGH/MID/NORM/Manual
Gamma
0.45/1/MODE1/MODE2
Mirror image effect
OFF/Horizontally/Vertically/Horizontally and Vertically
Aperture
ON/OFF specifiable
Privacy masking
OFF/ON, Up to 8 spots, Lockable with password
AUTO / COLOR / B/W, specifiable COLOR / B/W
switching sensitivity for AUTO mode, switchable
DAY/NIGHT
COLOR / B/W mode working with external terminal
(during COLOR mode), switchable ON/OFF for color
burst for B/W mode.
External x 1, Output x 1, NO/NC switch
ALARM INPUT &
Alarm output: Open Collector, Grounded Emitter with
OUTPUT
18 V/25 mA
Detectable area frame x 5 spot, specifiable location,
Motion sensor
Masking and Area ON/OFF
Camera title
OFF/ON, up to 16 characters, adjustable title position
NEGA/POSI inversion
OFF/ON
Communications
Simplified controller (VAC-70) supported
Power indicator
LED-red
Operational
–10 ~ +50°C/below 90% RH (Non-condensing)
temperature/humidity
Power source
24 V ±10% AC, 60 Hz, 12 - 15 V DC
Power consumption
6 W
Weight
420 g
Dimensions
67 x 54 x 128
(W x H x D mm)
• The appearance and specifications of the product are subject to
change without notice.
58
English

Advertisement

Table of Contents
loading

Table of Contents