Naming Cameras; Title (Title Setting) - Sanyo VCC-WD8574 Instruction Manual

Naming Cameras

You can give a name (title) to each camera. The specified names are displayed on the monitor
so that you can easily distinguish the monitoring images when you use multiple cameras.
LANGUAGE
TITLE
SYNC
EXPOSURE
DAY/NIGHT
WHITE BALANCE
ALARM
OPTION
PRESET
TITLE ON
MENU

TITLE (Title Setting)

1 1
1 1
Choose a character(s) from the "Character
Selecting Field".
Character Selecting Field
TITLE SETTING
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789 :-
ID ????????????????
POSITION
PRESET
ID string
MENU
RThe characters are displayed starting from the left in the ID
string.
MAIN MENU
SET
ON
INT
SET
AUTO
ATW
SET
SET
OFF
END
SET
SET
OFF
BACK
For accessing the MAIN MENU, see page 13 – 14.
TITLE SETTING
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789 :-
ID ????????????????
SET
POSITION
PRESET
MENU
2 2
2 2
Repeat step
Example: CAM1
ID CAM1????????????
• You can enter up to 16 characters.
• The letters "???...." do not appear on the monitoring screen, but
if you select "ON" for the "TITLE" and then enter no letter at all,
the monitor will show you "???....".
MEMO: • If you want to overwrite the character, move the cursor onto it
in the ID string and choose any new letter.
• If you want the name to be displayed on the monitor in two
lines, insert the line feed mark (y) in the ID string wherever you
want to start a new line. On the monitor screen, the name will
be displayed in two lines. You can enter up to 16 characters
including the line feed mark.
ROOM1
ROOM1 ROOM2
SET
OFF
BACK
1
to complete the title.
ROOM2
ID String
16
English