Changing Ringer Tones; (Gigaset S685 Only); Activating/Deactivating; Music On Hold - Siemens Gigaset S685 User Manual

Base station settings
Resetting the system PIN
If you have forgotten your system PIN you
can reset the base station to the original
code 0000:
Disconnect the power cord from the base
station. Hold down the registration/pag-
ing key on the base station while recon-
necting the power cable to the base sta-
tion. Release the key after a while.
The base has now been reset and the sys-
tem PIN 0000 set.
Please note:
All handsets are deregistered and must be re-
registered.

Changing ringer tones

(Gigaset S685 only)

u
Volume:
You can choose between five volumes
and the "crescendo" ring, see page 50.
Select "0" to deactivate the base station
ringer tone.
u
Ringer tones:
You can set a ringer tone melody for
external calls, see page 50.
¢ ¢ ¢
v Ð
Base
For how to adjust the settings, see
page 50.

Activating/deactivating

music on hold

¢ ¢ ¢
v Ð
Base
Press to activate or deactivate music
§OK§
‰
on hold ( = on).
58
Ringer Settings
Music on hold

Repeater support

With a repeater you can increase the range
and reception strength of your base sta-
tion. You will need to activate repeater
mode. This will terminate any calls that
are in progress at the time.
Precondition: A repeater is registered.
Eco mode is disabled.
¢ ¢ ¢
v Ð
Base
¢
Repeater Mode
Press the display key.
§Yes§
When repeater mode is active, the menu
item is marked with
Please note:
Repeater support and eco mode (see page 13)
rule each other out, i.e. both functions cannot
be used at the same time.
Restoring the base station to
the factory settings
When the settings are restored
u
eco mode is disabled,
u
handsets are still registered,
u
the system PIN is not reset.
¢ ¢ ¢
v Ð
Base
~
Enter the system PIN and press
.
§OK§
Press the display key.
§Yes§
Cancel the restoring process by pressing
a or the display key
a
Press and hold (idle status)
Add. Features
‰
.
Base Reset
.
§No§