Handset Settings; Shortcuts For Functions And Numbers - Siemens Gigaset S685 User Manual

Activating the room monitor and
entering the destination number
¢ ¢
v í
Room Monitor
¤
Change multiple line input:
Room M.:
Select On to activate.
Call to:
External number: Select the number
from the directory (press display key
Ò
) or enter it directly. Only the
last 4 digits are displayed.
Internal number:
¢ ¢
s (select handset or
§OK§
All, if all registered handsets are to be
¢
called) .
§OK§
Level:
Set noise level sensitivity
¤
Press to save the settings.
§Save§
Changing set destination numbers
¢ ¢
v í
Room Monitor
s
Scroll to the
X
or
§Delete§
Delete existing number.
¤
Enter number as described in "Activat-
ing the room monitor and entering the
destination number" (page 47).
Deactivating the room monitor
remotely
Preconditions: The phone must support
touch tone dialling and the room monitor
should be set for an external destination
number.
¤
Accept the call from the room monitor
and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room moni-
tor settings (e.g. no ringer tone) on the
handset will remain activated until you
press the display key
¢
INT
§Options§
Call
(Low or High).
Call to: line.
on the handset.
§OFF§
To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
with (page 47).
§Save§

Handset settings

Your handset is preconfigured, but you
can change the settings to suit your indi-
vidual requirements.
Shortcuts for functions
and numbers
You can assign the left display key and
each of the digit keys Q and 2 to
O a number or a function. The right-
hand display key has already been
assigned a function. You can change the
assignment.
The number is then dialled or the function
started by simply pressing a key.
Assigning a digit key/left display key
Precondition: The digit key or the left dis-
play key has not yet been assigned a
number or a function.
¤
Press the display key
and hold the digit key.
The list of possible key assignments is
opened. The following can be selected:
Quick Dial / Call-by-Call
Assign key to a number from the direc-
tory or call-by-call list.
The directory or call-by-call list is
opened.
¤
Select an entry and press
If you delete or edit an entry in the
directory or call-by-call list, this has no
effect on the assignment to the digit/
display key.
Room Monitor
Assign key to the menu for setting and
activating the room monitor (see
page 46).
Handset settings
}
or press
.
§OK§
47