Setting Sms Centre; Sms To A Pabx; Activating/Deactivating The Sms Function - Siemens Gigaset E455 User Manual

SMS (text messages)

Setting SMS centre

Entering/changing SMS centres
¤
You should find out about the services
and special functions offered by your
service provider before you make a
new application and/or before you
delete pre-configured call numbers.
¢ ¢
v î
Settings
s
Select SMS centre (e.g.
Centr. 1) and press
¤
Change multiple line input:
Active Send:
Select Yes if the text messages are to be
sent via the SMS centre. For the SMS
centres 2 to 4, the setting only applies
to the next SMS.
SMS:
Press the display key
number of the SMS service and insert a
star if your service provider supports
personal mailboxes.
E-mail:
Press the display key
number of the email service.
¤
Save changes (page 53).
Note:
Ask your service provider for details of how
you should enter service numbers if you wish
to use personal mailboxes (requirement: your
service provider supports this function).
Sending an SMS through another SMS
centre
¤
Activate the SMS centre (2 to 4) as
centre.
¤
Send the SMS.
This setting only applies to the SMS that is
being sent next. Afterwards, the setting
automatically changes back to
Centr. 1.
28
¢
Service Centres
Service
.
§OK§
. Enter the
§Edit§
. Enter the
§Edit§
send
Service

SMS to a PABX

u
You can only receive an SMS when the
Calling Line Identification is for-
warded to the extension of the PABX
(CLIP). The CLIP of the phone number
for the SMS centre is evaluated in your
Gigaset.
u
If required, you must prefix the number
for the SMS centre with the access code
(depending on your PABX).
If in doubt, test your PABX e.g. by send-
ing a text message to your own
number: once with and once without
the access code.
u
When you send SMS messages, your
sender number may be sent without
your extension number. In this case the
recipient cannot reply to you directly.
Sending and receiving SMS on ISDN
PABXs is only possible via the MSN
number assigned to your base station.
Activating/deactivating the
SMS function
When you switch off you cannot send or
receive any SMS with your phone.
The settings which you have made for
sending and receiving SMS (e.g. the call
numbers of the SMS centres) and the
entries in the incoming and draft message
lists are saved when you switch off your
phone.
v
Open menu.
5 5 O 2 L
Enter the digits.
Q
Deactivate the SMS function.
§OK§
Or:
1
Activate SMS function (default
§OK§
settings).