Connecting The Base Station With The Router (Internet); Connecting The Pc To The Router (Optional) - Siemens Gigaset S675 IP Installation Manual

Hide thumbs Also See for Gigaset S675 IP:
Table of Contents

Advertisement

Connecting the base station
5

Connecting the base station with the router (Internet)

B
A
As soon as the cable connecting the phone and router
is plugged in and the router is switched on, the button
lights up on the front of the base station
(Paging button).
6

Connecting the PC to the router (optional)

You can change the settings on the phone's base station using a PC connected to your phone
via the router.
>
Connect a PC to an open LAN port on your router.
>
The procedure in steps
IP address by the router (i.e. DHCP is enabled on router and phone).
Exception: (e.g. if DHCP is not enabled on the router) you will have to assign a static IP
address to the base station for LAN access. You must enter this IP address on the handset
before carrying out the following steps. Further information can be found in the user
guide on the enclosed CD.
The following handset menu can be used to make the entry:
p
(press right)
0000).
to
requires that your phone is automatically assigned an
7
11
¢ Ð ¢
¢
Base
Local Network
A
Connect one side of the Ethernet cable
into the LAN port on the side of the
base station.
B
Insert the other side of the Ethernet
cable into a open LAN port on your
router.
Use the Ethernet cable supplied.
¢
enter system PIN (default PIN is
9

Advertisement

Table of Contents
loading

Table of Contents