Personal Safety; Tool Use And Care - Chicago Electric 98089 Set Up And Operating Instructions Manual

1. Stay alert. Watch what you are doing, and use common sense when operat-
ing a power tool. Do not use a power tool while tired or under the influence
of drugs, alcohol, or medication. A moment of inattention while operating power
tools may result in serious personal injury.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
2.
Keep your hair, clothing, and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
3. Remove adjusting keys or wrenches before turning the Cut Off Saw on.
wrench or a key that is left attached to a rotating part of the machine may result in
personal injury.
4. Do not overreach. Keep proper footing and balance at all times.
ing and balance enables better control of the power tool in unexpected situations.
5. use safety equipment.
using this product. Proper hearing and breathing protection must also be used.
1. Do not force the tool. use the correct tool for your application.
tool will do the job better and safer at the rate for which it is designed.
2. Do not use the Cut Off Saw if the engine's Kill Switch (5D) does not immedi-
ately turn it off. Any tool that cannot be controlled with its Kill Switch is danger-
ous and must be replaced.
Store idle tools out of reach of children and other untrained persons.
3.
are dangerous in the hands of untrained users.
4. maintain tools with care.
and are easier to control. Do not use a damaged tool. Tag damaged tools "Do
not use" until repaired.
5. Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the tool's operation. if damaged, have
the tool serviced before using. Many accidents are caused by poorly maintained
tools.
6. use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
SKU 98089 For technical questions, please call 1-800-444-3353

PeRSOnal SaFeTY

Always wear ANSI-approved safety impact goggles when

TOOl uSe anD CaRe

Properly maintained tools are less likely to malfunction
A
Proper foot-
The correct
Tools
PAGE 3