Care & Maintenance - ProFire PERF30R Owner's Manual

CARE AND MAINTENANCE
CLEANING THE BURNERS
After removing:
1. Clean the exterior of the burner with a wire brush.
2. Clear any clogged ports with a straightened paper clip.
3. Never use a wooden toothpick as it may break off and clog the port.
4. Shake out any debris through the air shutter.
5. Use a flashlight to inspect the burner inlet to ensure it is not blocked.
6. If an obstruction can be seen, use a straightened metal wire coat-hanger to clean it
out.
CLEANING THE ORIFICES
No regular maintenance should be needed for the orifices. They should only be removed
if it is determined that there is a blockage.
FLAVOR GRID
The flavor grid should be cleaned regularly as it has grease and other debris falling di-
rectly on to it. Keeping it clean will greatly reduce flare-ups and grease fires.
TO CLEAN
1. Wait until the entire grill is cool then remove the cooking grids.
2. Lift out the flavor grid and brush it with a steel wire brush until all the carbon build up
and other debris are removed.
3. Clean with a degreaser or soapy water solution if necessary.
TO REPLACE THE BURNERS
Replace a burner by sliding the end with the air shutter into the opening located on the
inside of the grill and be sure the burner is placed on to orifice. Then place the burner
onto the mounting bracket and replace the screw. Be careful not to change the air shut-
ter's original position. Once reinstalled, light all of the burners and check for proper
Warning:
flame. Serious injury may occur if the orifice is not located properly in the
burner.
REMOVING AND REPLACING THE BATTERY IN THE IGNITERS
1. Unscrew the plastic nut on the front of the igniter.
2. Insert a AAA battery making sure the + side faces in.
3. Screw the black plastic nut back on.
18