Led Indicator; Flight Mode - ReSound M60 User Manual

If you have two hearing instruments with the synchronization function enabled, program changes to one
instrument will automatically repeat in the second instrument. When a program change is made in one
instrument, you will hear the same amount of confirmation beeps in the second instrument.
LED Indicator (optional)
Some paediatric hearing instruments are equipped with a visual indi-
cator which blinks to show the instrument status. Your hearing care
professional can activate the LED indicator either to show only control
changes (such as increasing or decreasing volume or changing pro-
gramme) or both control changes and periodic status updates. The
LED indicator can also be disabled.
When enabled, the LED indicator will light continuously for several seconds when the instrument is turned
on. If Wireless Flight Mode is activated, this indication changes to a double-blink series (see Flight Mode,
page 17).
When enabled, the LED indicator will blink whenever the programme button is pressed. The number of
blinks indicates which programme you have selected (one blink = programme one, two blinks = programme
two, etc.). When activating audio streaming from a ReSound Unite accessory (Phone Clip, TV streamer or
Mini Microphone or when an FM / DAI audio program is selected, the connection will be indicated by a
long blink followed by a short. Volume change (up or down) is indicated by a short blink. A volume limit is
indicated with a long blink.
16
If status indications are enabled, the LED indicator will blink every 5 seconds to show in which programme
the hearing instrument is operating. The blink pattern associated with each programme is illustrated in the
table on the next page. Low Battery is indicated by a rapid series of blinks followed by a short pause then
the series is repeated again until the battery is full discharged. Your hearing care professional can demon-
strate the various blinks during the hearing instrument fitting.
Normal Start
Startup Signal

Flight Mode

Program 1
Change Program
Program 2
Program 3
Program 4
FM / Streamer
Volume Up/Down
Change Volume
Volume Limit
Low Battery
i
Flight mode*
When boarding a flight or entering an area where RF transmitters are prohibited, wireless functional-
ity must be deactivated, as it is not allowed to radiate radio signals during flights or in otherwise restricted
areas.
*Wireless models only
...
17