Inserting/Removing Hearing Instruments - ReSound Receiver-in-ear Hearing Instrument User Manual

inserting/Removing hearing instruments

Insertion (custom RIE moulds)
1. Hold the RIE mould between your thumb and index finger and position its
sound outlet in your ear canal.
2. Slide the RIE mould all the way into your ear with a gentle, twisting
movement.
3. Move the RIE mould up and down and gently press to ensure it is positioned
correctly in the ear. Opening and closing your mouth can ease insertion.
4. Make sure the hearing instrument is seated behind the ear.
By experimenting, an easier method may be discovered. With proper insertion,
hearing instruments should fit snugly but comfortably. If hearing instruments
cause irritation of the ears, contact your hearing care professional.
Never attempt to modify the shape of the hearing instrument, RIE
moulds, or tubing yourself.
16
Tip: It may be helpful to pull the top of your ear back with your opposite hand during
insertion to open the ear canal.
Insertion (domes)
1. Hold the receiver tube where it bends, and gently push the dome into the ear canal. Push
the dome far enough into the ear canal so that the receiver tube lies flush with the side of the
head.
2. It is important that the tube and the
dome fit correctly into your ear.
3. When the dome is placed correctly,
you should not be able to see the receiver
tube sticking out when facing a mirror.
Note: You should never attempt to bend or modify the shape of the receiver tube.
17