ReSound Receiver-in-ear Hearing Instrument User Manual page 16

changing wax guard for nP receiver tube
1 2 3 4
1. Clean any debris from the old waxguard.
2. Insert the wand into the old waxguard.
3. Twist the wand with the waxguard in a clockwise direction to ensure it is attached to the
wand.
4. Pull the wand and waxguard away from the tube/mould.
30
6 7 8 9
5
5. Insert the old waxguard into the center of the HF3 wheel.
6. Dispose of the old waxguard by drawing the wand to the narrow end of the center disposal
area.
7. Insert the empty wand into a new waxguard on the HF3 wheel.
10
8. Pull the new waxguard attached to the wand away from the HF3 wheel.
9. Insert the wand into the receiver tube/mould.
10. Twist the wand to release the new waxguard onto the receiver tube/mould.
31